We use cookies and analysis technologies to offer a variety of services and to continuously improve them. You can find a detailed explanation of cookies and options to object here.
1SPEEDYSCAF
Contact Us

Speedyscaf

QUICK AND EASY.

With the Speedy assembly frame Lightweight, the Layher SpeedyScaf equipment has been the recognized leader for decades in insertion-frame systems. Modern, fast and robust, making it ideal for work on facades. Layher SpeedyScaf is, thanks to its versatile and well thought-out range of parts, equally economical to use in scaffolding construction and in professional trades.

Quick and easy

With just six basic elements and a few manual operations, this logically and safely erected scaffolding is "speedy" because it is assembled without bolts. Numerous expansion parts permit optimum adaptation to existing building geometries – without much extra effort during assembly. SpeedyScaf is available in different scaffolding widths, made of hot-dip galvanized steel or lightweight aluminium, for every application.
 
Guaranteed with building authority approvals:


  • SpeedyScaf 70 Aluminium Z-8.1-844
  • SpeedyScaf 100 Steel Z-8.1-840 and
  • SpeedyScaf 70 Steel Z-8.1-16.2

Further international approvals available.

Always the right scaffolding deck for every application

The Xtra-N deck

Consisting of an aluminium frame with riveted steel cap and filled with a glass-fibre-reinforced and non-slip plastic board.


  • For use up to load class 3.
  • Available lengths from 0.73 m to 3.07 m.
  • Available width 0.32 m and 0.61 m. (one-piece deck).
  • Integrated with Allround und SpeedyScaf

The Stalu deck

Durable aluminium deck with sturdy and riveted steel cap.

  • Integrated with Allround and SpeedyScaf.
  • For use up to load class 6 depending on deck length.
  • Available lengths from 0.73 m to 3.07 m.
  • Available widths are 0.19 m, 0.32 m and 0.61 m.

The Robust deck

Consisting of an aluminium frame with riveted steel cap, filled with a plywood board protected against rot.


  • Available lengths from 0.73 m to 3.07 m.
  • Available widths are 0.61 m.
  • Width 0.61 m: For use up to load class 3.
  • Rapid assembly possible thanks to one-piece deck.
  • Integrated with Allround and SpeedyScaf.
    
Learn more

The steel deck LW

using higher-tensile steel grades, a thinner material and an intelligent combination of profiles and material concentrations at structurally relevant areas, it has proved possible to reduce the weight of the steel deck, already established in the market, by up to 2.2 kg or 10 % – while retaining its high load-bearing capacity. That makes this steel deck lighter, handier and more effective. Discover the benefits that the steel deck LW from Layher has to offer: Because Layher Lightweight is about more than just weight.
  • Better grip thanks to optimised steel cap and to the new longitudinal profile, ensuring more ergonomic handling and greater safety.
  • Can be combined with steel decks of previous generations during assembly and transport.
  • Strong feeling of safety when walking on the decks thanks to transverse reinforcements in the surface.
  • Weight saving of up to 10 % while retaining a high load-bearing capacity – meaning lower labour costs, an increase in truck capacity and improved ergonomics.
  • Can be used up to load class 6 (≤ 2.07 m) and in standard and roof brick guards.

The Xtra-N deck

Consisting of an aluminium frame with riveted steel cap and filled with a glass-fibre-reinforced and non-slip plastic board.


  • For use up to load class 3.
  • Available lengths from 0.73 m to 3.07 m.
  • Available width 0.32 m and 0.61 m. (one-piece deck).
  • Integrated with Allround und SpeedyScaf

The Stalu deck

Durable aluminium deck with sturdy and riveted steel cap.

  • Integrated with Allround and SpeedyScaf.
  • For use up to load class 6 depending on deck length.
  • Available lengths from 0.73 m to 3.07 m.
  • Available widths are 0.19 m, 0.32 m and 0.61 m.

The Robust deck

Consisting of an aluminium frame with riveted steel cap, filled with a plywood board protected against rot.


  • Available lengths from 0.73 m to 3.07 m.
  • Available widths are 0.61 m.
  • Width 0.61 m: For use up to load class 3.
  • Rapid assembly possible thanks to one-piece deck.
  • Integrated with Allround and SpeedyScaf.
    
Learn more

The steel deck LW

using higher-tensile steel grades, a thinner material and an intelligent combination of profiles and material concentrations at structurally relevant areas, it has proved possible to reduce the weight of the steel deck, already established in the market, by up to 2.2 kg or 10 % – while retaining its high load-bearing capacity. That makes this steel deck lighter, handier and more effective. Discover the benefits that the steel deck LW from Layher has to offer: Because Layher Lightweight is about more than just weight.
  • Better grip thanks to optimised steel cap and to the new longitudinal profile, ensuring more ergonomic handling and greater safety.
  • Can be combined with steel decks of previous generations during assembly and transport.
  • Strong feeling of safety when walking on the decks thanks to transverse reinforcements in the surface.
  • Weight saving of up to 10 % while retaining a high load-bearing capacity – meaning lower labour costs, an increase in truck capacity and improved ergonomics.
  • Can be used up to load class 6 (≤ 2.07 m) and in standard and roof brick guards.

LAYHER, THE INTEGRATED SCAFFOLDING SYSTEM: APPLICATION-ORIENTED ACCESSORIES

Brackets

SpeedyScaf can be quickly widened inwards or outwards: The brackets are fastened with the welded-on half-coupler in the corner plate area or in corner areas as swivel brackets, using the spigot of the Speedy assembly frame Lightweight, to form a deck level with the main scaffolding.

A list of all available brackets can be found in the current SpeedyScaf Price List in the protected customer zone.

 

Anchoring

The scaffolding must be anchored vertically to and parallel with the façade, with resistance to both tensile and compressive stress. Layher offers quicker and safer solutions:
 
The SpeedyScaf wall tie, which is fastened by a double coupler in the corner plate area of the Speedy assembly frame Lightweight and is supported with the fork plate on the channel section of the Speedy assembly frame Lightweight.
 
The wall tie, which is connected with two double couplers to both upright tubes.
 
The SpeedyScaf corner plate coupler
For outside and inside brackets, continuous anchoring directly on the corner plate of the Speedy assembly frame Lightweight using the top hole is possible and ensures a greater height clearance at the top scaffolding level.
 
The ETICS tie is used for a controlled introduction of high forces, parallel to the facade, when using  thermal insulation compound systems.

The Speedy Vario wall tie system permits structurally favourable anchoring anywhere inside the scaffolding level, even outside the connectors of the assembly frames, for example in buildings with many windows, skeleton structures or in similar situations.

A list of all available solutions can be found in the current SpeedyScaf Price List in the protected customer zone.

Roof brick guards

Roof brick guards must be used when there is any risk of slipping on the roof, and they are mandatory for a roof inclination of 20° and above. Either brick guards or protection nets can be attached to the brick guard support.

Stairway Access

The aluminium platform and comfort stairways offer increased safety, convenience and speed when ascending the tower. Transporting material is made easier by using the work decks as all-round walkways too.
 
In accordance with TRBS 2121 T1 regulations, stairways should be used when:


  • extensive work has to be carried out.
  • the ascent height in the scaffolding exceeds 10 m, or
  • extensive amounts of material have to be transported via this access,

The landing-type stairway is connected using the U-distance coupler to the main scaffolding.

Protective Roofs 

Layher weather protection roofs can be used in a number of variants depending on their span, the snow load or the wind load. That saves you real money when planning temporary weather protection roofs. For easy use on the site, clearly set-out material and loading capacity tables for snow and wind loads are available for you. Protective roofs are not a one-off solution for Layher, but a standard product – this ensures readiness for immediate delivery.

Protect System

With its Protect System, Layher offers an enclosure system that fits in with Allround Scaffolding and SpeedyScaf. It is used for example for pedestrian protection in combination with the Allround Bridging System and also for  environmental protection and noise reduction. Highly economical to use thanks to quick and easy assembly in a simple and logical assembly sequence, and the frequent use of a few system components. The Layher Protect System is not a one-off solution for Layher, but a standard product – this ensures readiness for immediate delivery.


  • Visually attractive.
  • Designed for regular use.
  • Only a small number of individual parts.
  • Quick, easy and logical assembly.

Brackets

SpeedyScaf can be quickly widened inwards or outwards: The brackets are fastened with the welded-on half-coupler in the corner plate area or in corner areas as swivel brackets, using the spigot of the Speedy assembly frame Lightweight, to form a deck level with the main scaffolding.

A list of all available brackets can be found in the current SpeedyScaf Price List in the protected customer zone.

 

Anchoring

The scaffolding must be anchored vertically to and parallel with the façade, with resistance to both tensile and compressive stress. Layher offers quicker and safer solutions:
 
The SpeedyScaf wall tie, which is fastened by a double coupler in the corner plate area of the Speedy assembly frame Lightweight and is supported with the fork plate on the channel section of the Speedy assembly frame Lightweight.
 
The wall tie, which is connected with two double couplers to both upright tubes.
 
The SpeedyScaf corner plate coupler
For outside and inside brackets, continuous anchoring directly on the corner plate of the Speedy assembly frame Lightweight using the top hole is possible and ensures a greater height clearance at the top scaffolding level.
 
The ETICS tie is used for a controlled introduction of high forces, parallel to the facade, when using  thermal insulation compound systems.

The Speedy Vario wall tie system permits structurally favourable anchoring anywhere inside the scaffolding level, even outside the connectors of the assembly frames, for example in buildings with many windows, skeleton structures or in similar situations.

A list of all available solutions can be found in the current SpeedyScaf Price List in the protected customer zone.

Roof brick guards

Roof brick guards must be used when there is any risk of slipping on the roof, and they are mandatory for a roof inclination of 20° and above. Either brick guards or protection nets can be attached to the brick guard support.

Stairway Access

The aluminium platform and comfort stairways offer increased safety, convenience and speed when ascending the tower. Transporting material is made easier by using the work decks as all-round walkways too.
 
In accordance with TRBS 2121 T1 regulations, stairways should be used when:


  • extensive work has to be carried out.
  • the ascent height in the scaffolding exceeds 10 m, or
  • extensive amounts of material have to be transported via this access,

The landing-type stairway is connected using the U-distance coupler to the main scaffolding.

Protective Roofs 

Layher weather protection roofs can be used in a number of variants depending on their span, the snow load or the wind load. That saves you real money when planning temporary weather protection roofs. For easy use on the site, clearly set-out material and loading capacity tables for snow and wind loads are available for you. Protective roofs are not a one-off solution for Layher, but a standard product – this ensures readiness for immediate delivery.

Protect System

With its Protect System, Layher offers an enclosure system that fits in with Allround Scaffolding and SpeedyScaf. It is used for example for pedestrian protection in combination with the Allround Bridging System and also for  environmental protection and noise reduction. Highly economical to use thanks to quick and easy assembly in a simple and logical assembly sequence, and the frequent use of a few system components. The Layher Protect System is not a one-off solution for Layher, but a standard product – this ensures readiness for immediate delivery.


  • Visually attractive.
  • Designed for regular use.
  • Only a small number of individual parts.
  • Quick, easy and logical assembly.

LAYHER SPEEDYSCAF LIGHTWEIGHT 1.09 M

LAYPLAN CLASSIC AND LAYPLAN CAD

Time and material are crucial factors in scaffolding construction. To make the most efficient use of both, the Layher range includes the integrated software solution LayPLAN SUITE. Several software packages are on offer for different requirements: LayPLAN CLASSIC, LayPLAN CAD.

OUR STAFF ARE HAPPY TO ASSIST YOU